NEWS
  Aircraft & Manufacturers
23 OCTOBER, 2017 Boeing and Mitsubishi Heavy Industries (MHI) have entered an agreement that ...
Airbus is yet to commit to a maiden flight date for its A330neo, but both engines have been fitted . ...
26 SEPTEMBER, 2017 Boeing has created a programme office to support the New Mid-market Airplane, ...
  Airlines business
Gulfstream delivered 30 business jets during the third quarter, one more unit than the same period . ...
Hãng hàng không Quốc gia Vietnam Airlines cho biết sẽ khai thác trở lại đường bay Hà Nội - Tuy Hoà . ...
Embraer Executive Jets delivered the first midsize Legacy 500 assembled at its recently expanded ...
 
Aircraft & Manufacturers
Friday, 20/04/2018, 13:50:56 PM
Boeing rolls out 787-10 in politically charged ceremony
Comment Comment |  Send To E-mail Send To E-mail |  Print Print
Boeing formally introduced the first 787-10 on 17 February in North Charleston, South Carolina, in a strikingly political ceremony led by US president Donald Trump.

The wings, fuselage sections and empennage of the 787 are assembled in Italy and Japan, but Trump and Boeing chairman, president and chief executive Dennis Muilenburg made the formal roll-out of the 787-10 a call to arms for restoring American manufacturing.

Boeing assembles the 787-10 exclusively in North Charleston, South Carolina, which also assembles the 787-8 and 787-9 along with the original assembly site in Everett, Washington.

“As your president I’m going to do everything I can to unleash the power of the American spirit and to put our people back to work. This is our mantra: buy American and hire American. We want products made in America, made by American hands,” Trump said.

In introducing Trump, Muilenburg followed on the same theme. Despite the 787’s global supply chain and customer base, the 787-10 roll-out offered a testament to American manufacturing, Muilenburg says.
“This is about manufacturing in the US,” he says, adding that Boeing plans to spend another $6 billion of research and development and capital in the USA.

The presidential visit marked a new high point in the profile of Boeing’s once-troubled North Charleston campus. Boeing acquired the 787 aft and centre fuselage assembly operations in 2009 after Alenia-Vought joint venture Global Aeronautica struggled to meet production and quality targets. Following a two-month strike by 27,000 machinists in the Puget Sound area in 2008, Boeing announced it would expand the non-unionised North Charleston campus with a 787 final assembly line.

The 787-10 roll-out event came only two days after a 74% majority of North Charleston workers voted to reject representation by the International Association of Machinists and Aerospace Workers.
The first completed 787-10, fitted with Rolls-Royce Trent 1000 engines, will now be prepared to enter flight testing ahead of a scheduled first delivery in the first half of next year.

The 230-passenger aircraft is Boeing’s third and largest variant in the 787 family, with high expectations. So far, the 787-9 is outselling all three variants, but Boeing executives expect the 787-10 to become a major order attraction, flying major regional trunk routes within Asia, from the Middle East and across the Atlantic Ocean.

Source: flightglobal.com

Comment Comment |  All Comment
Other news [Back]
 EASA to order seal checks on Trent 1000s  (06/01/2017)
 Iran Air finalises Airbus order  (06/01/2017)
 Emirates, Airbus Agree To Postpone Deliveries of 12 A380s  (30/12/2016)
 Delta cancels legacy Northwest 787 order  (30/12/2016)
 Boeing sets twin-aisle record with 500th 787 delivery  (23/12/2016)
 United takes first 777-300ER amid widebody fleet shifts  (22/12/2016)
 Boeing to lower 777 rate to five monthly in August 2017  (16/12/2016)
 The Mile High Club Will Come With Drinks and Dinner  (16/12/2016)
 ATR crash is PIAs tenth hull loss since 2000  (09/12/2016)
 Boeing 787 flies with Trent 1000-TEN engine  (09/12/2016)
 First major 787-10 sections delivered to final assembly  (05/12/2016)
 Crashed Avro operated without mandatory fuel reserves: DGAC  (05/12/2016)
 A350-1000 carries out high-speed take-off abort test  (25/11/2016)
 A350-1000 takes off on maiden flight  (25/11/2016)
 Second MRJ test aircraft enroute to USA  (18/11/2016)
 
SERVICES
 VALC News
On 19 Dec 2012, VALC successfully took delivery of the A321-231 aircraft with MSN 5418. This is the ...
Chi tiết
At 17:00 5th September, 2012 local time in Hamburg, Vietnam Aircraft Leasing Company (VALC)   ...
PRESS RELEASE  23-08-2012 11:12am
VALC delivered the first A321-200 to Vietnam Airlines.
Chi tiết
On November 5th, 2011, Vietnam Aircraft Leasing Company (VALC) took delivery of the EC155 B1 ...
 
VALC Valc, leasing, aircraft, plane, airlines, fastmoney, boeing, airbus, việt nam, airlines, viet nam, finance, investment Copyright © 2008 VALC.COM.VN
Back to top
Homepage  |   Contact  |   Make your homepage  |   Introduce VALC  |   RSS  RSS Feeds
Copyright © 2008 VALC.COM.VN. All Rights Reserved. Address: 14th Floor, Tower A Vincom Building, No.191 Ba Trieu Str., Hanoi, Vietnam.